⭐ ⭐ ⭐ ⭐ ⭐ 5.0 on Google · Trusted by 200+ businesses
⭐ ⭐ ⭐ ⭐ ⭐ 5.0 on Google · Trusted by 200+ businesses
Logic LC installs commercial structured cabling across the Philadelphia area: CAT5e, CAT6 and CAT6A copper, singlemode and multimode fiber, and the voice, data, wireless, camera, access control and alarm cabling that connects every device in your building.
We also build out the racks, cabinets and patch panels the cable lands on, then test, certify and label every run, so your IT team inherits a system it can actually manage.
CAT6 handles most standard commercial installations: offices, cameras and access points. CAT6A carries 10-gigabit speeds over the full 100-meter channel, compared with about 55 meters for CAT6, and adds stronger protection against crosstalk. It is the usual choice for data centers, high-performance networks and buildings that want room to grow.
Every copper run has the same limit: about 100 meters, or 328 feet, including patch cords. Beyond that, we will recommend fiber, an intermediate network enclosure or another engineered solution.
We test cable runs after installation to catch excessive length, poor terminations, damaged conductors, crossed pairs and performance loss before they turn into network problems. When your scope includes it, you get electronic certification reports for the completed runs.
Cables are labeled at both ends with a consistent identification system unless your spec calls for something different, and we can hand over test results, photographs, cable schedules and port information with the closeout documentation.
Pricing depends on cable length, pathway access, ceiling type, terminations, lifts, working hours and site conditions, and several cables sharing one pathway to the same location usually cost less per cable. Many smaller projects can be scheduled within one to two weeks, and evening, overnight and weekend work may be available.
Already have cabling nobody can trace? We trace, tone, label, test and troubleshoot existing copper and fiber, then clean up the closet so it stays manageable.
Based in Essington, we install structured cabling for offices, warehouses, manufacturing plants, schools, healthcare facilities and data centers throughout Philadelphia, Pennsylvania, New Jersey and Delaware, and we deploy cabling for multi-site organizations across the lower 48.
Copper and fiber cabling planned around your floor plan, your devices and your growth, from a few new drops to a full building.
CAT5e, CAT6 and CAT6A cabling; singlemode and multimode fiber with fusion splicing and testing; voice, data, wireless access point, security camera, access control and alarm cabling; network racks, cabinets and patch panels; MDF and IDF buildouts; cable testing and certification; tracing, toning, tagging and labeling; and network cleanup and cable management.
Both are used for commercial Ethernet. CAT6 supports 10-gigabit speeds up to about 55 meters, while CAT6A supports them over the full 100 meters, with enhanced crosstalk protection in a thicker cable. CAT6 suits most offices, cameras and access points; CAT6A suits data centers, high-performance networks and future capacity.
The standard maximum channel for CAT5e, CAT6 and CAT6A is about 100 meters, or 328 feet, including patch cords. For longer distances we recommend fiber, an intermediate network enclosure or another engineered solution.
Yes. We test runs after installation and can provide electronic certification reports when they are in scope. Cables are labeled at both ends with a consistent identification system unless your project specifies otherwise.
It depends on the project’s size, location, materials and site readiness, but many smaller projects can be scheduled within one to two weeks. Emergency service and expedited scheduling may also be available.